PROGRESSING CAVITY hopper PUMPS AND INFEED SCREW MONOBLOCK - LT SERIES

The rotor is available in many materials depending on the application: carbon steel with thick chrome plating, AISI 304 (1.4301) stainless steel, AISI 316 (1.4401) stainless steel and others on request. In addition, ‘standard pitch’ or ‘long pitch’ geometry is possible.

The stator is made of vulcanised rubber inside a steel tube, with integral seals on both sides in a variety elastomer (NBR, HNBR, EDPM, FPM and more on request). It is possible to have the stator inlet with hopper-shaped opening for improved feed of the product into the pumping part.

The coupling shaft with pre-feeding screw can be manufactured with different types of joints to suit various applications.

• Cross joint protected by sleeve in various rubbers in carbon steel version for industrial use and stainless steel for chemical environment use;
• Homokinetic joint and/or cross cardan joint for the industrial sector;
• Homocardanic joint for the industrial sector, particularly used for pumps high capacity.

The pump housing is made with a rectangular/square hopper.

Different types of process connections are available according to international standards (EN, DIN, ANSI, GAS and others) or in special designs. Different types of materials (e.g. CAST IRON, STAINLESS STEEL and others) are possible depending on application contexts.

There are various types of seals:

• Gland Packing: standard seal with packed rings at low friction coefficient. Solution with low installation costs. Used in processes with medium solids content at medium abrasion. Pressure (on shaft seal): up to 2 bar.
• Gland packing with flushing: same as gland packing solution but with external fluxing. Suitable for processes with heavy fluid abrasion. Pressure (on shaft seal): up to 2.5 bar.
• Single component mechanical seal: mechanical seal constructed in accordance with EN 12756 (ex DIN 24960). Unbalanced. Two solutions are possible: single cylindrical spring with elastomer bellows or leaf spring and/or multi-spring and o-ring seal. Bi-directional direction of rotation. Suitable for processes with viscous products and low dry percentages. Pressure (on shaft seal): up to 12 bar.
• Single mechanical seal with protected springs: mechanical seal constructed in accordance with EN 12756 (ex DIN 24960). Balanced. Mechanical seal with built-in shaft sleeve, single leaf spring and/or multi-spring protected. Bi-directional direction of rotation. Suitable for processes with very abrasive products and high dryness with solid particles in suspension. Pressure (on shaft seal): up to 12 bar.
• Single mechanical seal with additional quench: suitable for solid medium, adhesive, crystallizing. Pressure (on shaft seal): up to 12 bar.
• Back to back mechanical seal: solution with two back-to-back seals in which the faces are not in contact with the pumped medium. Suitable for solid medium, abrasive and aggressive. Pressure (on shaft seal): up to 12 bar.
• Single mechanical seal for food grade products: mechanical seal constructed in accordance with UNI EN 12756 (ex DIN 24960). Balanced. Mechanical seal with built-in shaft sleeve, single leaf spring and/or multi-spring protected. Bi-directional direction of rotation. Easily cleaned with no free stagnation points. Suitable for FCMs (Food Contact Materials) processes. Pressure (on shaft seal): up to 12 bar.
• Single mechanical seal external: mechanical seal constructed in accordance with EN 12756 (ex DIN 24960). Balanced. Bi-directional direction of rotation. Suitable for processes with very abrasive products and high dryness with solid particles in suspension. Pressure (on shaft seal): up to 12 bar.

The drive is directly flanged to the pump support lantern, resulting in compact dimensions, low total weight, easy maintenance and economic advantages.

The T SERIES progressive cavity pumps execution, equipped with an independent bearing support, allows coupling with any type of drive via a flexible coupling.